Many people are concerned about the bearing capacity of Jinan cable bridge, especially the cable tray installed on the ground, or in other cases, when other goods are pressed on the bridge, it is necessary to understand the bearing capacity of the cable tray itself. So how to effectively guarantee the bearing capacity of cable tray?

濟南電纜橋架

Jinan cable bridge

事實上，對于橋架廠家來說，許多尺寸的橋架的承載能力實際上還沒有被測量過，但是只知道大概的重量，例如1.5或以上的厚度，一個人站起來是可以的(不要太胖)。如果厚度是2.0，胖的人站起來就可以了，負重約150公斤。如果是2.5厚或3.0厚，承載力已經很好了。

In fact, for the bridge manufacturer, the bearing capacity of many bridge sizes has not been measured, but only the approximate weight, such as 1.5 or above thickness, can stand up (not too fat). If the thickness is 2.0, the fat person can stand up and load about 150 kg. If the thickness is 2.5 or 3.0, the bearing capacity is good.

如果0.6-1.0毫米厚度的橋架似乎基本沒有承載能力，建議不要在上面放東西。一般而言，規格和厚度較小的橋架僅適用于靠墻安裝或吊裝。如果它是水平安裝在地面上，盡量不要把人或貨物放在上面。

If the 0.6-1.0 mm thick bridge seems to have no bearing capacity, it is recommended not to put anything on it. Generally speaking, the bridge with smaller size and thickness is only suitable for installation or hoisting against the wall. If it is installed horizontally on the ground, try not to put people or goods on it.

電纜載荷分為靜態載荷、動態載荷和附加載荷。靜載荷是指敷設在電纜橋架內的電纜的類型、數量和外徑重量/單位長度，根據不同的電纜敷設路線進行列表和統計。動載荷是指電纜橋架安裝和維護期間施工和維護人員的重量。

Cable load is divided into static load, dynamic load and additional load. Static load refers to the type, quantity and outer diameter weight / unit length of cables laid in cable tray, which are listed and counted according to different cable laying routes. Dynamic load refers to the weight of construction and maintenance personnel during the installation and maintenance of cable tray.

眾所周知!濟南電纜橋架的剛度需要符合相關的檢驗標準，以避免在以后的使用中因質量問題而造成事故。由于電纜橋架大部分時間放置在室外，因此應注意防止電纜橋架腐蝕。相信大家通過上述內容的詳細介紹，大家對如何保障電纜橋架承載能力都有了新的了解以及更加深入的認識。

As we all know, the stiffness of Jinan cable bridge needs to meet the relevant inspection standards, in order to avoid accidents caused by quality problems in the future use. Since the cable tray is placed outdoors most of the time, attention should be paid to prevent corrosion of the cable tray. I believe that through the detailed introduction of the above contents, we have a new understanding and a more in-depth understanding of how to ensure the bearing capacity of cable tray.